SLM Metal 3D Printing Technology Specifications
एसएलएम (चयनात्मक लेजर पिघलने) Material Properties and Applications
| Metal 3D Printing Technology | Material Type | Abbreviation | Material Status | Common Post-Processing | Tolerance Range | Processing Advantages | Processing Disadvantages | Application Fields | Maximum Build Size |
|---|---|---|---|---|---|---|---|---|---|
| एसएलएम | एल्यूमीनियम मिश्र धातु | AL | Metal powder | Sandblasting, Anodized Matte Black, Polishing, Electroplating, Passivation, Spray Painting/Powder Coating | Based on 3D drawing assessment, post-printing accuracy for smaller dimensions (within 50mm) is approximately ±0.2mm. Secondary precision machining required for accuracy below ±0.1mm | Lightweight material, fast heat dissipation, good electrical and thermal conductivity | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements | Prototypes, automotive, चिकित्सा, digital electronics, toys, mechanical equipment, एयरोस्पेस, etc. | 420*225*260मिमी |
| स्टेनलेस स्टील | SS | Metal powder | Sandblasting, Polishing, Electroplating, Passivation, Spray Painting/Powder Coating | Rust-proof, excellent corrosion resistance, ideal for mirror finish effects | |||||
| टाइटेनियम मिश्र धातु | टीसी4 | Metal powder | Sandblasting, Polishing, Spray Painting/Powder Coating | High strength with low density, good mechanical properties, toughness and corrosion resistance | 150*150*200मिमी | ||||
| Die Steel | CX | Metal powder | Sandblasting, Heat Treatment | High toughness and good thermal resistance | Rough surface, requires secondary processing | Plastic, die-casting, shoe mold and other mold industries | 250*250*300मिमी | ||
| 1.2709 | Metal powder | High toughness and good thermal resistance | |||||||
| निकल – based Superalloys | GH4169 | Metal powder | Hot isostatic pressing (HIP) , solution treatment and aging, machining | Superior high-temperature strength (>800°C) Excellent oxidation/corrosion resistance Tailorable γ′ precipitation hardening High design freedom for complex geometries | High crack sensitivity, Strict parameter control required, Costly post-processing, High powder cost/reactivity | एयरोस्पेस, energy, high-temperature corrosion-resistant industrial systems | 250*250*300मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | एल्यूमीनियम मिश्र धातु |
| Abbreviation | AL |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Anodized Matte Black, Polishing, Electroplating, Passivation, Spray Painting/Powder Coating |
| Tolerance Range | Based on 3D drawing assessment, post-printing accuracy for smaller dimensions (within 50mm) is approximately ±0.2mm. Secondary precision machining required for accuracy below ±0.1mm |
| Processing Advantages | Lightweight material, fast heat dissipation, good electrical and thermal conductivity |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Prototypes, automotive, चिकित्सा, digital electronics, toys, mechanical equipment, एयरोस्पेस, etc. |
| Maximum Build Size | 420*225*260मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | स्टेनलेस स्टील |
| Abbreviation | SS |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Polishing, Electroplating, Passivation, Spray Painting/Powder Coating |
| Tolerance Range | Based on 3D drawing assessment, post-printing accuracy for smaller dimensions (within 50mm) is approximately ±0.2mm. Secondary precision machining required for accuracy below ±0.1mm |
| Processing Advantages | Rust-proof, excellent corrosion resistance, ideal for mirror finish effects |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Prototypes, automotive, चिकित्सा, digital electronics, toys, mechanical equipment, एयरोस्पेस, etc. |
| Maximum Build Size | 420*225*260मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | टाइटेनियम मिश्र धातु |
| Abbreviation | टीसी4 |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Polishing, Spray Painting/Powder Coating |
| Tolerance Range | Based on 3D drawing assessment, post-printing accuracy for smaller dimensions (within 50mm) is approximately ±0.2mm. Secondary precision machining required for accuracy below ±0.1mm |
| Processing Advantages | High strength with low density, good mechanical properties, toughness and corrosion resistance |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Prototypes, automotive, चिकित्सा, digital electronics, toys, mechanical equipment, एयरोस्पेस, etc. |
| Maximum Build Size | 150*150*200मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | Die Steel |
| Abbreviation | CX |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Heat Treatment |
| Tolerance Range | Based on 3D drawing assessment, post-printing accuracy for smaller dimensions (within 50mm) is approximately ±0.2mm. Secondary precision machining required for accuracy below ±0.1mm |
| Processing Advantages | High toughness and good thermal resistance |
| Processing Disadvantages | Rough surface, requires secondary processing |
| Application Fields | Plastic, die-casting, shoe mold and other mold industries |
| Maximum Build Size | 250*250*300मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | Die Steel |
| Abbreviation | 1.2709 |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Heat Treatment |
| Tolerance Range | Based on 3D drawing assessment, post-printing accuracy for smaller dimensions (within 50mm) is approximately ±0.2mm. Secondary precision machining required for accuracy below ±0.1mm |
| Processing Advantages | High toughness and good thermal resistance |
| Processing Disadvantages | Rough surface, requires secondary processing |
| Application Fields | Plastic, die-casting, shoe mold and other mold industries |
| Maximum Build Size | 250*250*300मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | निकल – based Superalloys |
| Abbreviation | GH4169 |
| Material Status | Metal powder |
| Common Post-Processing | Hot isostatic pressing (HIP) , solution treatment and aging, machining |
| Tolerance Range | Based on 3D drawing assessment, post-printing accuracy for smaller dimensions (within 50mm) is approximately ±0.2mm. Secondary precision machining required for accuracy below ±0.1mm |
| Processing Advantages | Superior high-temperature strength (>800°C) Excellent oxidation/corrosion resistance Tailorable γ′ precipitation hardening High design freedom for complex geometries |
| Processing Disadvantages | High crack sensitivity, Strict parameter control required, Costly post-processing, High powder cost/reactivity |
| Application Fields | एयरोस्पेस, energy, high-temperature corrosion-resistant industrial systems |
| Maximum Build Size | 250*250*300मिमी |
Plastic 3D Printing Technologies Comparison
Material Properties and Applications of Various Plastic 3D Printing Methods
| 3डी मुद्रण प्रौद्योगिकी | सामग्री श्रेणी | सामग्री का नाम | रंग विकल्प | प्रोसेसिंग के बाद | आयामी सटीकता | लाभ | सीमाएँ | अनुप्रयोग | अधिकतम निर्माण आकार (मिमी) |
|---|---|---|---|---|---|---|---|---|---|
| एस.एल.ए | Photopolymer Resin | ABS-like | White | Sanding, Bead Blasting, Painting, Silkscreen, Vacuum Plating, UV Coating, Laser Engraving | ±0.2-0.5mm | Cost-effective, Fast turnaround, Assembling capability, No size restrictions | Brittle material, Heat resistance \\\~40°C, Yellowing over time without coating, Limited reuse of threaded holes | Prototypes, Automotive, Medical, उपभोक्ता इलेक्ट्रॉनिक्स, Toys, Machinery, एयरोस्पेस | 1200×600×400 |
| ABS-like | Yellow | Cost-effective, Fast turnaround, Assembling capability, No size restrictions | Brittle material, Heat resistance \\\~40°C, Yellowing over time without coating, Limited reuse of threaded holes | ||||||
| ABS-like | Green | Cost-effective, Fast turnaround, Assembling capability, No size restrictions | Brittle material, Heat resistance \\\~40°C, Yellowing over time without coating, Limited reuse of threaded holes | ||||||
| ABS-like | Black | Cost-effective, Fast turnaround, Assembling capability, No size restrictions | Brittle material, Heat resistance \\\~40°C, Yellowing over time without coating, Limited reuse of threaded holes | ||||||
| एस.एल.ए | Photopolymer Resin | PC-like | Transparent | Sanding, Polishing, Bead Blasting, Painting, Silkscreen, Vacuum Plating, Laser Engraving | ±0.2-0.5mm | Affordable pricing, Quick cycle time, Assembly possible, Unlimited size capacity | 90% transparency max (vs CNC machining), Limited optical clarity | Transparent parts, Lampshades, Display models | 600×600×400 |
| PC-like | Semi-Transparent | Affordable pricing, Quick cycle time, Assembly possible, Unlimited size capacity | 90% transparency max (vs CNC machining), Limited optical clarity | ||||||
| एसएलएस | नायलॉन | देहात | Black/White | कोई नहीं | ±0.3mm | Wear-resistant, High temperature tolerance | Rough surface finish, Not suitable for bonding | Home Appliances, Power Tools, Automotive Components | 200×200×100 |
| डीएलपी | लाल मोम | – | लाल | कोई नहीं | ±0.1mm | उच्चा परिशुद्धि, बारीक विवरण क्षमता | अधिक लागत, सीमित निर्माण आकार | जेवर, सामान, एनिमेशन मॉडल | 200×100×200 |
| एफडीएम | Inkjet Fused Filament | प्ला, टीपीयू, देहात, carbon fiber, पीसी, पेट | Multiple colors available | Grinding, polishing, sandblasting, spraying, silk – screening, लेजर उत्कीर्णन, etc. | ±0.05mm | Multiple colors, various materials, cost – effective, no size restrictions | Rough surface | Crafts, lighting fixtures, home furnishings, animation and comics, etc. | 1000*1000*500 |
| 3डी मुद्रण प्रौद्योगिकी | एस.एल.ए |
| सामग्री श्रेणी | Photopolymer Resin |
| सामग्री का नाम | ABS-like |
| रंग विकल्प | White |
| प्रोसेसिंग के बाद | Sanding, Bead Blasting, Painting, Silkscreen, Vacuum Plating, UV Coating, Laser Engraving |
| आयामी सटीकता | ±0.2-0.5mm |
| लाभ | Cost-effective, Fast turnaround, Assembling capability, No size restrictions |
| सीमाएँ | Brittle material, Heat resistance \\\~40°C, Yellowing over time without coating, Limited reuse of threaded holes |
| अनुप्रयोग | Prototypes, Automotive, Medical, उपभोक्ता इलेक्ट्रॉनिक्स, Toys, Machinery, एयरोस्पेस |
| अधिकतम निर्माण आकार (मिमी) | 1200×600×400 |
| 3डी मुद्रण प्रौद्योगिकी | एस.एल.ए |
| सामग्री श्रेणी | Photopolymer Resin |
| सामग्री का नाम | ABS-like |
| रंग विकल्प | Yellow |
| प्रोसेसिंग के बाद | Sanding, Bead Blasting, Painting, Silkscreen, Vacuum Plating, UV Coating, Laser Engraving |
| आयामी सटीकता | ±0.2-0.5mm |
| लाभ | Cost-effective, Fast turnaround, Assembling capability, No size restrictions |
| सीमाएँ | Brittle material, Heat resistance \\\~40°C, Yellowing over time without coating, Limited reuse of threaded holes |
| अनुप्रयोग | Prototypes, Automotive, Medical, उपभोक्ता इलेक्ट्रॉनिक्स, Toys, Machinery, एयरोस्पेस |
| अधिकतम निर्माण आकार (मिमी) | 1200×600×400 |
| 3डी मुद्रण प्रौद्योगिकी | एस.एल.ए |
| सामग्री श्रेणी | Photopolymer Resin |
| सामग्री का नाम | ABS-like |
| रंग विकल्प | Green |
| प्रोसेसिंग के बाद | Sanding, Bead Blasting, Painting, Silkscreen, Vacuum Plating, UV Coating, Laser Engraving |
| आयामी सटीकता | ±0.2-0.5mm |
| लाभ | Cost-effective, Fast turnaround, Assembling capability, No size restrictions |
| सीमाएँ | Brittle material, Heat resistance \\\~40°C, Yellowing over time without coating, Limited reuse of threaded holes |
| अनुप्रयोग | Prototypes, Automotive, Medical, उपभोक्ता इलेक्ट्रॉनिक्स, Toys, Machinery, एयरोस्पेस |
| अधिकतम निर्माण आकार (मिमी) | 1200×600×400 |
| 3डी मुद्रण प्रौद्योगिकी | एस.एल.ए |
| सामग्री श्रेणी | Photopolymer Resin |
| सामग्री का नाम | ABS-like |
| रंग विकल्प | Black |
| प्रोसेसिंग के बाद | Sanding, Bead Blasting, Painting, Silkscreen, Vacuum Plating, UV Coating, Laser Engraving |
| आयामी सटीकता | ±0.2-0.5mm |
| लाभ | Cost-effective, Fast turnaround, Assembling capability, No size restrictions |
| सीमाएँ | Brittle material, Heat resistance \\\~40°C, Yellowing over time without coating, Limited reuse of threaded holes |
| अनुप्रयोग | Prototypes, Automotive, Medical, उपभोक्ता इलेक्ट्रॉनिक्स, Toys, Machinery, एयरोस्पेस |
| अधिकतम निर्माण आकार (मिमी) | 1200×600×400 |
| 3डी मुद्रण प्रौद्योगिकी | एस.एल.ए |
| सामग्री श्रेणी | Photopolymer Resin |
| सामग्री का नाम | PC-like |
| रंग विकल्प | Transparent |
| प्रोसेसिंग के बाद | Sanding, Polishing, Bead Blasting, Painting, Silkscreen, Vacuum Plating, Laser Engraving |
| आयामी सटीकता | ±0.2-0.5mm |
| लाभ | Affordable pricing, Quick cycle time, Assembly possible, Unlimited size capacity |
| सीमाएँ | 90% transparency max (vs CNC machining), Limited optical clarity |
| अनुप्रयोग | Transparent parts, Lampshades, Display models |
| अधिकतम निर्माण आकार (मिमी) | 600×600×400 |
| 3डी मुद्रण प्रौद्योगिकी | एस.एल.ए |
| सामग्री श्रेणी | Photopolymer Resin |
| सामग्री का नाम | PC-like |
| रंग विकल्प | Semi-Transparent |
| प्रोसेसिंग के बाद | Sanding, Polishing, Bead Blasting, Painting, Silkscreen, Vacuum Plating, Laser Engraving |
| आयामी सटीकता | ±0.2-0.5mm |
| लाभ | Affordable pricing, Quick cycle time, Assembly possible, Unlimited size capacity |
| सीमाएँ | 90% transparency max (vs CNC machining), Limited optical clarity |
| अनुप्रयोग | Transparent parts, Lampshades, Display models |
| अधिकतम निर्माण आकार (मिमी) | 600×600×400 |
| 3डी मुद्रण प्रौद्योगिकी | एसएलएस |
| सामग्री श्रेणी | नायलॉन |
| सामग्री का नाम | देहात |
| रंग विकल्प | Black/White |
| प्रोसेसिंग के बाद | कोई नहीं |
| आयामी सटीकता | ±0.3mm |
| लाभ | Wear-resistant, High temperature tolerance |
| सीमाएँ | Rough surface finish, Not suitable for bonding |
| अनुप्रयोग | Home Appliances, Power Tools, Automotive Components |
| अधिकतम निर्माण आकार (मिमी) | 200×200×100 |
| 3डी मुद्रण प्रौद्योगिकी | डीएलपी |
| सामग्री श्रेणी | लाल मोम |
| सामग्री का नाम | – |
| रंग विकल्प | लाल |
| प्रोसेसिंग के बाद | कोई नहीं |
| आयामी सटीकता | ±0.1mm |
| लाभ | उच्चा परिशुद्धि, बारीक विवरण क्षमता |
| सीमाएँ | अधिक लागत, सीमित निर्माण आकार |
| अनुप्रयोग | जेवर, सामान, एनिमेशन मॉडल |
| अधिकतम निर्माण आकार (मिमी) | 200×100×200 |
| 3डी मुद्रण प्रौद्योगिकी | एफडीएम |
| सामग्री श्रेणी | Inkjet Fused Filament |
| सामग्री का नाम | प्ला, टीपीयू, देहात, carbon fiber, पीसी, पेट |
| रंग विकल्प | Multiple colors available |
| प्रोसेसिंग के बाद | Grinding, polishing, sandblasting, spraying, silk – screening, लेजर उत्कीर्णन, etc. |
| आयामी सटीकता | ±0.05mm |
| लाभ | Multiple colors, various materials, cost – effective, no size restrictions |
| सीमाएँ | Rough surface |
| अनुप्रयोग | Crafts, lighting fixtures, home furnishings, animation and comics, etc. |
| अधिकतम निर्माण आकार (मिमी) | 1000*1000*500 |
