Diferentes materiales metálicos’ 3Rango de precios de impresión D (USD/cm³) in China Market in February 2026
Nota: Prices are subject to change at any time. The following prices are only the price quotations in February 2026 for reference only. And the price does not include shipping fees.
| Metal Material | Price Range (USD/cm³) | Typical Application Scenarios |
|---|---|---|
| Aluminum Alloy Series | ||
| AlSi10Mg/6061 | 0.26-0.52 | Automotive parts, UAV structures, lightweight products |
| High-strength Aluminum Alloy | 0.52-1.06 | Aerospace structural components, high-end industrial parts |
| Stainless Steel Series | ||
| 316L/304 | 0.81-1.35 | Medical devices, food equipment, industrial parts |
| 17-4PH (Precipitation Hardening) | 1.08-1.62 | High-strength parts, mold components |
| Titanium Alloy Series | ||
| Ti6Al4V (Domestic) | 2.40-4.00 | Aero-engine components, implantes medicos |
| Ti6Al4V (Imported/Medical Grade) | 4.00-8.00 | High-end medical equipment, precision aerospace components |
| Cobalt-Chromium Alloy | ||
| CoCrMo (Medical Grade) | 13.50-24.00 | Orthopedic implants, dental restorations |
| Nickel-Based Alloy | ||
| Inconel 625/718 | 6.80-13.50 | High-temperature environment components, aero-engines |
| Copper Alloy | ||
| Pure Copper/Brass | 4.00-6.80 | Conductive components, intercambiadores de calor |
| Metales preciosos | ||
| Gold Alloy (14K/18K) | 540.00-960.00 | Joyas, luxury goods |
| Silver | 205.00-340.00 | High-end jewelry, electronic products |
| Platino | 680.00-1100.00 | High-end jewelry, special industrial contacts |
Price Explanation
1. Calculation Basis: Price = Material Density (g/cm³) × Powder Price (USD/g) × (1.5-2.5)
- Aluminum alloy density: 2.7g/cm³
- Stainless steel density: 7.98g/cm³
- Titanium alloy density: 4.51g/cm³
- Cobalt-chromium alloy density: 8.3g/cm³
- The coefficient (1.5-2.5) includes processing fees, equipment depreciation, post-processing costs, etc..
2. Factors Affecting Prices:
- Technology Route: SLM (Fusión selectiva por láser) is the most expensive, followed by EBM (Fusión por haz de electrones); Binder Jetting is relatively cheaper.
- Part Complexity: The more complex the structure, the more support materials are required, resulting in higher prices.
- Batch Size: Mass production can reduce costs by 30-50%.
- Postprocesamiento: Pulido, tratamiento térmico, and surface treatment can increase costs by 20-50%.
Market Trends
- Prices of aluminum alloys and stainless steel have dropped significantly in recent years, with promotional prices from some manufacturers as low as 0.14-0.43 USD per gram.
- Titanium alloy prices have decreased by approximately 50%, and China domestic materials have fallen to 0.11-0.21 USD per gram.
- New technologies (p.ej., area printing) are expected to reduce metal 3D printing costs by 2026.
Nota: The price data is the average market price in February 2026, and there may be a 20-50% variation among different service providers and regions.
