We provide high-precision SLM metal 3D printed pump impellers in 5 mainstream types, covering full working conditions from clean water, chemical liquid to sewage and slurry. All impellers are manufactured with dense metal powder materials, featuring complex integrated molding, no welding, high mechanical strength, excellent corrosion resistance and cavitation resistance, perfectly customized for industrial pump replacement, prototype R&D and special fluid equipment.
1. 316L Semi-Open Impellers, Batch Produced via SLM 3D Printing
This is an unfinished batch semi-open impeller produced by SLM metal 3D printing technology, retaining the original printing substrate and supports. It is mainly used for mass customized pump spare parts and rapid prototype verification. The optional metal materials are 17-4PH stainless steel and 316L stainless steel, which meet the batch production standards of industrial pump accessories with stable material performance and high dimensional consistency.
2. Semi-Open Pump Impeller
The semi-open impeller is designed with a rear cover plate and no front cover plate, with unobstructed flow channels and strong anti-clogging performance. It is widely used for conveying sewage, chemical slurry and medium containing fine particles. The conventional printing materials are 316L stainless steel and 17-4PH stainless steel. 316L is suitable for corrosive water environments such as seawater and chemical media, while 17-4PH provides higher hardness and cavitation resistance for industrial sewage pumps.
3. Open Pump Impeller
The fully open impeller has no front and rear cover plates, with an ultra-wide flow passage structure. It has the strongest anti-blocking ability and is suitable for slurry pumps, impurity pumps and fluid media containing large particles and fibers. The preferred printing materials are316L stainless steel and 17-4PH stainless steel. For severe wear and corrosive working conditions, Inconel 625 is optional to extend the service life.
4. Integrated Pump Housing & Impeller Assembly
The integrated pump body and impeller are integrally formed by metal 3D printing without secondary assembly, which effectively avoids assembly errors and fluid leakage. It is specially used for micro chemical pumps, fuel cell pumps and laboratory R&D prototype equipment. Conventional materials are AlSi10Mg aluminum alloy and 316L stainless steel. Aluminum alloy is for lightweight prototype verification, and 316L is for formal industrial corrosive working conditions.
5. Closed Pump Impeller
Equipped with double front and rear cover plates, the closed impeller forms a completely closed flow channel, with the highest hydraulic efficiency and minimal fluid leakage. It’s manufactured in one single piece via SLM metal 3D printing, with no assembly or welding required. It is the mainstream choice for clean water pumps and chemical process pumps, suitable for conveying pure water and clean chemical media. The standard printing materials are 17-4PH stainless steel and 316L stainless steel. For high-temperature and high-pressure corrosive working conditions, Inconel 718 / Inconel 625 dan Ti6Al4V titanium alloy are available for customization.
Testimoni dari Klien B2B Luar Negeri
“Saya sangat khawatir akan terjadi sesuatu yang buruk. Namun, setelah menerima produk, Saya menyadari bahwa kekhawatiran saya sama sekali tidak beralasan. DT 3D Printing adalah pabrik yang sangat andal dengan kualitas terjamin.”
“Kualitas produknya terbaik – notch, Keahlian pengerjaannya sangat indah, Hasil cetaknya sangat bagus, dan kecepatan pengirimannya sangat cepat. Secara keseluruhan, Produk ini menawarkan nilai yang sangat baik untuk harganya, dan saya sangat puas.”
“Kualitas cetaknya benar-benar bagus, dan harganya cukup terjangkau. Kecepatan logistiknya juga cepat. Secara keseluruhan, DT adalah pabrik yang dapat diandalkan, dan kami akan terus bekerja sama dengan mereka dalam jangka panjang.”
Tentang kami
1. We are a professional metal 3D printing manufacturer.
2. Kami mencetak komponen logam dengan teknologi 3D untuk industri otomotif, medis, pesawat, dirgantara, drone, dan industri perkapalan, menggunakan bahan seperti baja tahan karat, titanium, tembaga, aluminium dan jenis-jenis paduannya.
3. Kami menyediakan layanan pencetakan 3D satu atap.
Layanan kami meliputi:
SLM / BJ / SLA / MJF / FDM / SLS / DLP, CNC machining and post-processing
4. Kami memiliki 33 SLM metal 3D printers, 14 CNC machining tools, 60 printer 3D berbahan plastik, 50 BJ 3D printers (owned by another company in which DT has invested), dan angkanya terus bertambah.
5. We are a source factory for many global 3D printing service providers.
Core Advantages of 3D Printing for Pump Applications
Optimized Hydraulic Efficiency
Free from traditional manufacturing constraints, we engineer complex curved blade profiles and smooth flow passages that maximize hydraulic efficiency, reduce turbulence, and lower overall pump energy consumption.
No Tooling, Low Volume Viable
Eliminate high upfront mold and tooling costs. 3D printing makes custom pump impellers, small-batch spare parts, and prototype iterations affordable at any quantity, from one replacement unit to production runs.
Corrosion & Wear Resistant Construction
Select from a full range of industrial metal alloys matched to your operating fluid, including stainless steel, duplex steel, nickel alloys and titanium, for reliable performance in corrosive, abrasive and high-temperature pump environments.
Fast Replacement & Short Lead Times
Rapidly reproduce obsolete or hard-to-source pump impellers without tooling lead times. Cut equipment downtime from weeks to days with our fast-turnaround additive manufacturing service.
Material Selection Guide for SLM 3D Printing Pump Impellers
Stainless Steels (304L / 316L / 17-4 PH)
General-purpose corrosion resistance for municipal water, HVAC, and standard industrial fluid handling applications.
Duplex Stainless Steels
High strength and superior pitting resistance for seawater, brine, and moderately corrosive chemical processing environments.
Nickel Alloys (Hastelloy, Monel)
Extreme corrosion resistance for strong acids, alkalis, and high-temperature chemical pump applications.
Titanium Alloys
Excellent strength-to-weight ratio and outstanding corrosion resistance for seawater desalination, marine service, and food & pharmaceutical sanitary applications.
Applicable Pump Types
- Centrifugal pumps
- Water pumps & booster pumps
- Chemical process pumps
- Sewage & slurry pumps
- Marine & offshore pumps
- HVAC & circulation pumps
- Fire system pumps
- Food & sanitary pumps
Solusi Industri
Water Treatment & Municipal Water
Obsolete pump impeller replacement, multi-model spare part programs, and corrosion-resistant material upgrades for water distribution, wastewater treatment and pumping stations. Reduce inventory costs and shorten maintenance downtime with on-demand manufacturing.
Chemical Processing
Alloy-matched impeller solutions for corrosive process fluids, solvents, and high-temperature pumping systems. Fully dense printed structures eliminate casting porosity risks, with surface polishing options for smooth flow and reduced fouling.
HVAC & Building Services
Drop-in replacement impellers for standard HVAC pump housings, and custom performance-optimized designs for retrofit projects. Low minimum order quantities and fast lead times make engineering upgrades and maintenance simple.
Marine & Offshore
Seawater-resistant material options and classification society compliant materials for shipboard pumps, offshore platforms and marine cooling systems. Emergency spare part support available for critical vessel operations.
Food & Pharmaceutical
Sanitary-grade 3D printed impellers in stainless steel and titanium, with polished flow surfaces and no crevice design. Full material traceability and surface finish documentation to meet food, beverage and pharmaceutical industry standards.
Pasca-Pemrosesan & Quality Control
- CNC precision machining of mounting bores and fit surfaces
- Surface polishing of flow paths for improved hydraulic efficiency
- Dynamic balancing for high-speed pump operation
- Full dimensional inspection report with every order
- Hydrostatic pressure testing (optional)
Mengapa memilih kami?
- We 3D print many types of impellers for clients all over the world.
- We provide in-house manufacturing dengan 33 high-end industrial SLM metal 3D printers and 14 Mesin CNC.
- Special Offer for New Clients
- Our strength lies in SLM metal printing. Kami memiliki 33 premium SLM metal 3D printers, most costing around $150,000 masing-masing, and our fleet is still expanding.
- No MOQ (Jumlah Pesanan Minimum) required. We can customize even a single piece for you.
Feel free to contact us for inquiries.
Tidak ada MOQ (Jumlah Pesanan Minimum) batas di sini. Kami dapat menyesuaikan bahkan hanya satu bagian saja untuk Anda.
Selamat datang di layanan konsultasi.