SLM Metal 3D Printing Technology Specifications
SLM (Επιλεκτική τήξη με λέιζερ) Material Properties and Applications
| Metal 3D Printing Technology | Material Type | Abbreviation | Material Status | Κοινή μετα-επεξεργασία | Εύρος Ανοχής | Processing Advantages | Processing Disadvantages | Application Fields | Maximum Build Size |
|---|---|---|---|---|---|---|---|---|---|
| SLM | Κράμα αργιλίου | 6061/Alsi10mg/7075 | Metal powder | Sandblasting, Anodized Matte Black, Στίλβωμα, Electroplating, Passivation, Spray Painting/Powder Coating | ±0.1%—±0.3% | Lightweight material, fast heat dissipation, good electrical and thermal conductivity | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements | Πρωτότυπα, αυτοκινητοβιομηχανία, ιατρικός, digital electronics, παιχνίδια, μηχανικός εξοπλισμός, αεροδιαστημική, και τα λοιπά. | 400*400*390mm |
| Ανοξείδωτο ατσάλι | 316L/304L/17-4/347 | Metal powder | Sandblasting, Στίλβωμα, Electroplating, Passivation, Spray Painting/Powder Coating | Rust-proof, excellent corrosion resistance, ideal for mirror finish effects | |||||
| Κράμα τιτανίου | TC4/TA1 | Metal powder | Sandblasting, Στίλβωμα, Spray Painting/Powder Coating | High strength with low density, good mechanical properties, toughness and corrosion resistance | 420*225*260mm | ||||
| Die Steel | CX(S136) | Metal powder | Sandblasting, Heat Treatment | High toughness and good thermal resistance | Τραχιά επιφάνεια, requires secondary processing | Plastic, die-casting, shoe mold and other mold industries | 400*400*390mm | ||
| 1.2709(MS1/H13) | Metal powder | High toughness and good thermal resistance | |||||||
| Νικέλιο – based Superalloys | GH4169/625/3128 | Metal powder | Hot isostatic pressing (HIP) , solution treatment and aging, machining | Superior high-temperature strength (>800°C) Excellent oxidation/corrosion resistance Tailorable γ′ precipitation hardening High design freedom for complex geometries | High crack sensitivity, Strict parameter control required, Costly post-processing, High powder cost/reactivity | Αεροδιαστημική, energy, high-temperature corrosion-resistant industrial systems | 300*300*360mm |
| Metal 3D Printing Technology | SLM |
| Material Type | Κράμα αργιλίου |
| Abbreviation | 6061/Alsi10mg/7075 |
| Material Status | Metal powder |
| Κοινή μετα-επεξεργασία | Sandblasting, Anodized Matte Black, Στίλβωμα, Electroplating, Passivation, Spray Painting/Powder Coating |
| Εύρος Ανοχής | ±0.1%—±0.3% |
| Processing Advantages | Lightweight material, fast heat dissipation, good electrical and thermal conductivity |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Πρωτότυπα, αυτοκινητοβιομηχανία, ιατρικός, digital electronics, παιχνίδια, μηχανικός εξοπλισμός, αεροδιαστημική, και τα λοιπά. |
| Maximum Build Size | 400*400*390mm |
| Metal 3D Printing Technology | SLM |
| Material Type | Ανοξείδωτο ατσάλι |
| Abbreviation | 316L/304L/17-4/347 |
| Material Status | Metal powder |
| Κοινή μετα-επεξεργασία | Sandblasting, Στίλβωμα, Electroplating, Passivation, Spray Painting/Powder Coating |
| Εύρος Ανοχής | ±0.1%—±0.3% |
| Processing Advantages | Rust-proof, excellent corrosion resistance, ideal for mirror finish effects |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Πρωτότυπα, αυτοκινητοβιομηχανία, ιατρικός, digital electronics, παιχνίδια, μηχανικός εξοπλισμός, αεροδιαστημική, και τα λοιπά. |
| Maximum Build Size | 400*400*390mm |
| Metal 3D Printing Technology | SLM |
| Material Type | Κράμα τιτανίου |
| Abbreviation | TC4/TA1 |
| Material Status | Metal powder |
| Κοινή μετα-επεξεργασία | Sandblasting, Στίλβωμα, Spray Painting/Powder Coating |
| Εύρος Ανοχής | ±0.1%—±0.3% |
| Processing Advantages | High strength with low density, good mechanical properties, toughness and corrosion resistance |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Πρωτότυπα, αυτοκινητοβιομηχανία, ιατρικός, digital electronics, παιχνίδια, μηχανικός εξοπλισμός, αεροδιαστημική, και τα λοιπά. |
| Maximum Build Size | 420*225*260mm |
| Metal 3D Printing Technology | SLM |
| Material Type | Die Steel |
| Abbreviation | CX(S136) |
| Material Status | Metal powder |
| Κοινή μετα-επεξεργασία | Sandblasting, Heat Treatment |
| Εύρος Ανοχής | ±0.1%—±0.3% |
| Processing Advantages | High toughness and good thermal resistance |
| Processing Disadvantages | Τραχιά επιφάνεια, requires secondary processing |
| Application Fields | Plastic, die-casting, shoe mold and other mold industries |
| Maximum Build Size | 400*400*390mm |
| Metal 3D Printing Technology | SLM |
| Material Type | Die Steel |
| Abbreviation | 1.2709(MS1/H13) |
| Material Status | Metal powder |
| Κοινή μετα-επεξεργασία | Sandblasting, Heat Treatment |
| Εύρος Ανοχής | ±0.1%—±0.3% |
| Processing Advantages | High toughness and good thermal resistance |
| Processing Disadvantages | Τραχιά επιφάνεια, requires secondary processing |
| Application Fields | Plastic, die-casting, shoe mold and other mold industries |
| Maximum Build Size | 400*400*390mm |
| Metal 3D Printing Technology | SLM |
| Material Type | Νικέλιο – based Superalloys |
| Abbreviation | GH4169/625/3128 |
| Material Status | Metal powder |
| Κοινή μετα-επεξεργασία | Hot isostatic pressing (HIP) , solution treatment and aging, machining |
| Εύρος Ανοχής | ±0.1%—±0.3% |
| Processing Advantages | Superior high-temperature strength (>800°C) Excellent oxidation/corrosion resistance Tailorable γ′ precipitation hardening High design freedom for complex geometries |
| Processing Disadvantages | High crack sensitivity, Strict parameter control required, Costly post-processing, High powder cost/reactivity |
| Application Fields | Αεροδιαστημική, energy, high-temperature corrosion-resistant industrial systems |
| Maximum Build Size | 300*300*360mm |
Friendly Reminder from DT
εγώ. The Metal 3D Printing Materials commonly used for SLM in DT
- Κράμα αργιλίου (AlSi10Mg)
- Ανοξείδωτο ατσάλι (316μεγάλο)
- Die Steel (CX, 1.2709)
- Κράμα τιτανίου (TC4)
II. Printing Precautions from DT
- DT Industrial 3D Printers: The power is 500W (dual-laser).
- Printing Layer Thickness: 0.03mm, 0.06mm, 0.09mm.
- Natural Surface Features: Pitting (surface roughness: approx. Ra 16).
- Placement Direction: Generally, flat placement or 45° inclined placement delivers the best print quality.
- Printing Tolerance: For products with a size of 50mm or less, the printing tolerance is approximately ±0.2mm. For larger products, the printing tolerance will be determined based on the drawings.
- Σημείωμα: Wall thickness, groove width, groove depth, structural clearance, and font size that are less than 0.5mm cannot be guaranteed to be printable.
- Σημείωμα: The hole diameter should not be less than 0.8mm. Generally, the hole diameter will shrink by approximately 0.2mm after printing.
- Σημείωμα: For threads (including internal and external threads), tapping is recommended rather than direct printing.
- Post-processing of Metal 3D Printing Materials: Similar to traditional materials, these materials can undergo further processing.
- For Assembled Parts: Please be reminded to provide the assembly drawings. The parts will be assembled before delivery. If no such reminder is provided, we will not be responsible for assembly.
- Σημείωμα: For products with assembly clearance positions, a unilateral allowance of 0.15mm must be reserved.
- Σημείωμα: For parts with high-precision local assembly requirements (such as bearing holes, diameters, or flat assembly positions), machining allowances must be reserved in advance, and the parts should then be matched through secondary finishing.
- Σημείωμα: After high-temperature sintering in metal 3D printing, some slender parts, thin-walled parts, and shell-like structures may deform. The advantage of metal 3D printing lies in manufacturing parts with complex structures, while its accuracy and surface finish are inferior to those of CNC machining.
- Σημείωμα: For products requiring secondary processing, εμείς must confirm with the customer whether the 3D drawing has included allowances. If allowances have not been included, we must communicate with the engineering department or make a note on the production order: Appropriate allowances for secondary processing must be reserved before printing.