SLM Metal 3D Printing Technology Specifications
एसएलएम (चयनात्मक लेजर पिघलने) Material Properties and Applications
| Metal 3D Printing Technology | Material Type | Abbreviation | Material Status | Common Post-Processing | Tolerance Range | Processing Advantages | Processing Disadvantages | Application Fields | Maximum Build Size |
|---|---|---|---|---|---|---|---|---|---|
| एसएलएम | एल्यूमीनियम मिश्र धातु | 6061/Alsi10mg/7075 | Metal powder | Sandblasting, Anodized Matte Black, Polishing, Electroplating, Passivation, Spray Painting/Powder Coating | ±0.1%—±0.3% | Lightweight material, fast heat dissipation, good electrical and thermal conductivity | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements | Prototypes, automotive, चिकित्सा, digital electronics, toys, mechanical equipment, एयरोस्पेस, etc. | 400*400*390मिमी |
| स्टेनलेस स्टील | 316L/304L/17-4/347 | Metal powder | Sandblasting, Polishing, Electroplating, Passivation, Spray Painting/Powder Coating | Rust-proof, excellent corrosion resistance, ideal for mirror finish effects | |||||
| टाइटेनियम मिश्र धातु | TC4/TA1 | Metal powder | Sandblasting, Polishing, Spray Painting/Powder Coating | High strength with low density, good mechanical properties, toughness and corrosion resistance | 420*225*260मिमी | ||||
| Die Steel | CX(S136) | Metal powder | Sandblasting, Heat Treatment | High toughness and good thermal resistance | Rough surface, requires secondary processing | Plastic, die-casting, shoe mold and other mold industries | 400*400*390मिमी | ||
| 1.2709(MS1/H13) | Metal powder | High toughness and good thermal resistance | |||||||
| निकल – based Superalloys | GH4169/625/3128 | Metal powder | Hot isostatic pressing (HIP) , solution treatment and aging, machining | Superior high-temperature strength (>800°C) Excellent oxidation/corrosion resistance Tailorable γ′ precipitation hardening High design freedom for complex geometries | High crack sensitivity, Strict parameter control required, Costly post-processing, High powder cost/reactivity | एयरोस्पेस, energy, high-temperature corrosion-resistant industrial systems | 300*300*360मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | एल्यूमीनियम मिश्र धातु |
| Abbreviation | 6061/Alsi10mg/7075 |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Anodized Matte Black, Polishing, Electroplating, Passivation, Spray Painting/Powder Coating |
| Tolerance Range | ±0.1%—±0.3% |
| Processing Advantages | Lightweight material, fast heat dissipation, good electrical and thermal conductivity |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Prototypes, automotive, चिकित्सा, digital electronics, toys, mechanical equipment, एयरोस्पेस, etc. |
| Maximum Build Size | 400*400*390मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | स्टेनलेस स्टील |
| Abbreviation | 316L/304L/17-4/347 |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Polishing, Electroplating, Passivation, Spray Painting/Powder Coating |
| Tolerance Range | ±0.1%—±0.3% |
| Processing Advantages | Rust-proof, excellent corrosion resistance, ideal for mirror finish effects |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Prototypes, automotive, चिकित्सा, digital electronics, toys, mechanical equipment, एयरोस्पेस, etc. |
| Maximum Build Size | 400*400*390मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | टाइटेनियम मिश्र धातु |
| Abbreviation | TC4/TA1 |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Polishing, Spray Painting/Powder Coating |
| Tolerance Range | ±0.1%—±0.3% |
| Processing Advantages | High strength with low density, good mechanical properties, toughness and corrosion resistance |
| Processing Disadvantages | Support removal is troublesome after printing, rough surface, secondary processing required for high precision requirements |
| Application Fields | Prototypes, automotive, चिकित्सा, digital electronics, toys, mechanical equipment, एयरोस्पेस, etc. |
| Maximum Build Size | 420*225*260मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | Die Steel |
| Abbreviation | CX(S136) |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Heat Treatment |
| Tolerance Range | ±0.1%—±0.3% |
| Processing Advantages | High toughness and good thermal resistance |
| Processing Disadvantages | Rough surface, requires secondary processing |
| Application Fields | Plastic, die-casting, shoe mold and other mold industries |
| Maximum Build Size | 400*400*390मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | Die Steel |
| Abbreviation | 1.2709(MS1/H13) |
| Material Status | Metal powder |
| Common Post-Processing | Sandblasting, Heat Treatment |
| Tolerance Range | ±0.1%—±0.3% |
| Processing Advantages | High toughness and good thermal resistance |
| Processing Disadvantages | Rough surface, requires secondary processing |
| Application Fields | Plastic, die-casting, shoe mold and other mold industries |
| Maximum Build Size | 400*400*390मिमी |
| Metal 3D Printing Technology | एसएलएम |
| Material Type | निकल – based Superalloys |
| Abbreviation | GH4169/625/3128 |
| Material Status | Metal powder |
| Common Post-Processing | Hot isostatic pressing (HIP) , solution treatment and aging, machining |
| Tolerance Range | ±0.1%—±0.3% |
| Processing Advantages | Superior high-temperature strength (>800°C) Excellent oxidation/corrosion resistance Tailorable γ′ precipitation hardening High design freedom for complex geometries |
| Processing Disadvantages | High crack sensitivity, Strict parameter control required, Costly post-processing, High powder cost/reactivity |
| Application Fields | एयरोस्पेस, energy, high-temperature corrosion-resistant industrial systems |
| Maximum Build Size | 300*300*360मिमी |
Friendly Reminder from DT
मैं. The Metal 3D Printing Materials commonly used for SLM in DT
- एल्यूमीनियम मिश्र धातु (AlSi10Mg)
- स्टेनलेस स्टील (316एल)
- Die Steel (CX, 1.2709)
- टाइटेनियम मिश्र धातु (टीसी4)
द्वितीय. Printing Precautions from DT
- DT Industrial 3D Printers: The power is 500W (dual-laser).
- Printing Layer Thickness: 0.03मिमी, 0.06मिमी, 0.09मिमी.
- Natural Surface Features: Pitting (surface roughness: approx. Ra 16).
- Placement Direction: Generally, flat placement or 45° inclined placement delivers the best print quality.
- Printing Tolerance: For products with a size of 50mm or less, the printing tolerance is approximately ±0.2mm. For larger products, the printing tolerance will be determined based on the drawings.
- Note: Wall thickness, groove width, groove depth, structural clearance, and font size that are less than 0.5mm cannot be guaranteed to be printable.
- Note: The hole diameter should not be less than 0.8mm. Generally, the hole diameter will shrink by approximately 0.2mm after printing.
- Note: For threads (including internal and external threads), tapping is recommended rather than direct printing.
- Post-processing of Metal 3D Printing Materials: Similar to traditional materials, these materials can undergo further processing.
- For Assembled Parts: Please be reminded to provide the assembly drawings. The parts will be assembled before delivery. If no such reminder is provided, we will not be responsible for assembly.
- Note: For products with assembly clearance positions, a unilateral allowance of 0.15mm must be reserved.
- Note: For parts with high-precision local assembly requirements (such as bearing holes, diameters, or flat assembly positions), machining allowances must be reserved in advance, and the parts should then be matched through secondary finishing.
- Note: After high-temperature sintering in metal 3D printing, some slender parts, thin-walled parts, and shell-like structures may deform. The advantage of metal 3D printing lies in manufacturing parts with complex structures, while its accuracy and surface finish are inferior to those of CNC machining.
- Note: For products requiring secondary processing, हम must confirm with the customer whether the 3D drawing has included allowances. If allowances have not been included, we must communicate with the engineering department or make a note on the production order: Appropriate allowances for secondary processing must be reserved before printing.